P-500AL-5S "PairStand" instructions manual(ver.5.2 2015/5)!FEATURES● Save vast amounts of space by storing two bicycles in a single space
- 2 -Assemble P-500 in K-style LegRequired Tools1 x M5 Hex Wrench (included)1 x Phillips Screwdriver (not included)1 x 13mm Spanner (not included)U
Inside layout is as shown in Fig.F.You will install short Legs first, so you don't have to set Long Leg at this moment.(Fig. F)4Put the longer M6
2Put the black Collars to all holes on the Short Leg. Collar must be inserted from the larger hole.- 4 -3Set the Short Legs as they make "X"
Schematic of CradleLeft Side Arm(Front Side)Right Side Arm(Back side)Cradle CapHookBase PlateAlloy ClampMetal Collar(Left side only)Pivot-PinPivot-Pin
- 6 -!Loosen both bolts to adjust, not only the Clamp Tightening Bolt.!The bike cradle MUST only be installed on the front side. Failure to do so will
- 7 -Mount Your BikeTo mount your bike on P-500AL-5S, place the hooks under the crossing sections of the frame tubing.You should set the hook distance
- 8 -Using Black Round Decal(Fig. AD)If you wish to hide the holes beside the Leg Bracket when setting up in K-style leg configuration, put the suppli
Komentáře k této Příručce